Indoors
Färgbygge Naturum
Lasyrgrund (Glaze Primer)
Matte base coat for FÄRGBYGGE BEESWAX GLAZE.
A water-based base coat for beeswax glaze painting in indoor environments. Suitable for plaster, concrete, gypsum boards, and previously painted surfaces.
Contents
Water,
Pigment (TiO₂)*,
Shellac,
Mineral filler,
Casein,
Ethanol,
Sunflower lecithin,
Cellulose,
Vegetable oils,
Natural resin
Potassium sorbate**
IPBC**.
Sugar surfactants.
*Ethanol is used in combination with potassium sorbate (E 202) to disinfect packaging and production equipment. The preservative IPBC (3-iodo-2-propynyl butylcarbamate) may be present in less than <0.01%.
Fakta
Användning
Förpackning
Baser
Glans
Åtgång
Verktyg
Målningstemperatur
Spädes med
Övermålningsbar
Kulör
For interior walls and ceilings.
3L, 10L.
White.
Matte.
1L can cover an area of approximately 7-9 m².
Brushes, rollers, or sprayers.
15-25˚C.
Can be diluted with water, if needed.
After Approximately 6 hours.
-
Gör så här
Dokumentation & information
PREPARATION
Ensure that the surface is dry, firm, and free from dirt and grease.
Pre-treat with FÄRGBYGGE NATURUM RESIN PRIMER
PAINTING
Thoroughly stir the paint before use.
Apply the paint generously and roll it for an even coat.
Test the adhesion on a small, inconspicuous area or a test piece.
Learn more about wood glazing by clicking on "Painting with Wood Glaze" under Documentation & Information.
IMPORTANT
Do not use the paint in damp areas.
Ensure that the room is well-ventilated during both the painting process and the curing time.
Do not use paint that has an unusual odor or tends to develop mold.
AFTER PAINTING
Scrape off excess paint from tools before cleaning them.
Andra tittade även på dessa produkter
