Indoors

RESPEKT Klarlack
(Clear Lacquer)

RESPEKT Clear Lacquer is a durable satin-finish varnish that preserves the natural sheen of wood.

Suitable for painting indoor carpentry.

The RESPEKT series is the result of extensive development work to contribute to the transition towards more sustainable painting practices. The paints are water-based and contain a significant proportion of renewable raw materials.

Innehåll

RESPEKT Clear Lacquer contains the following ingredients: water, shellac, and Färgbygge's proprietary composite binder called RESPEKT. As a preservative, it may contain less than <0.01% of IPBC (3-iodo-2-propynyl butylcarbamate). Contains 1,2-benzisothiazol-3(2H)-one. May cause an allergic reaction.

Fakta

Användning

Förpackning

Spädes med

Glans

Målningstemperatur

Övermålningsbar

Verktyg

Åtgång

Baser

Indoor carpentry.
1L.
Can be diluted with water, if needed.
Satin-finish 15
15-25°C
After approximately 4 hours.
Brushes, rollers, or sprayers.
1L can cover an area of approximately 8-10m².
Transparent.

Gör så här

Dokumentation & information

PREPARATION:

Ensure that the surface is dry, firm, and free from dirt and grease.

For best results, lightly sand the surface with fine sandpaper before applying the final coat.

PAINTING:

Thoroughly stir the lacquer before use.

Apply the clear lacquer generously and work it into the surface thoroughly.

Avoid going back over the surface with the brush once the lacquer has started to set.

For more information about the products and their application, visit www.fargbygge.se.

MAINTENANCE ADVICE:

Handle newly lacquered surfaces with care. The final properties of lacquer are achieved after 1 week, and it is susceptible to wear and tear during that time.

Clean the surface with a clean cloth dampened with lukewarm water. More information about the products and their application can be found at www.fargbygge.se .

IMPORTANT:

Ensure that the room is well-ventilated during both the lacquering and curing process and the curing time, which can take up to 1 week.

Close the opened can tightly. The shelf life of opened cans is limited.

Do not use lacquer that has an unusual odor or tends to develop mold.

Scrape off excess lacquer from tools before cleaning them.

Dispose of liquid lacquer residues at your local environmental station.

Empty containers should be recycled at the recycling station.